This page uses javascript to help render elements, if you have problems please enable javascript.
 
You are now inside the main content area
 
 

Publications

Journal Publications

James, Sagil., and Buddine, B. “ A novel methodological framework for design for additive manufacturing for sheet metal tooling.” Progress in Additive Manufacturing, 07 February 2025. https://doi.org/10.1007/s40964-025-00990-0

Chetan C, and James Sagil. “ Preliminary Investigation on Biodegradable Ureteral Stents Using 3D Printing. ” Journal of Manufacturing and Materials Processing. 2025; 9(2):52. https://doi.org/10.3390/jmmp9020052

Hindson, W. A., and James, Sagil. " Effects of Surface Modification on a Proton Exchange Membrane for Improvements in Green Hydrogen Production." International Journal of Hydrogen Energy, Volume 49, Part C, 2 January 2024, Pages 1040-1047. https://doi.org/10.1016/j.ijhydene.2023.10.322

Ebeid, M., and James, Sagil. " Design for 4D Printing of Biodegradable Shape Memory Polymers for Disposable UAV Systems " Polymers 15.17 (2023): 3562. https://doi.org/10.3390/polym15173562

James, Sagil., and Moawad, M., “ Study on composite hydrogel mixture of calcium alginate/gelatin/kappa carrageenan for 3D bioprinting ” Bioprinting, Volume 31; (2023) https://doi.org/10.1016/j.bprint.2023.e00273

James, Sagil., and Mazaheri, M., “ Study on High-Speed Machining of 2219 Aluminum Utilizing Nanoparticle-Enhanced Minimum Quantity Lubrication (MQL) Technique ” Surfaces, 6(1), 29-39; (2023) https://doi.org/10.3390/surfaces6010003

James, Sagil., and Eckert, G., “ A Feasibility Study on Mixed Reality-Based Visualization and Interaction Tool for Performance Improvement of Metal Cutting Processes ” Metals, 13(2), 286 (2023) https://doi.org/10.3390/met13020286

James, Sagil., and Zarate, J., “ Preliminary Study on Volumetric 3D Printing Using Visible Light ” The International Journal of Advanced Manufacturing Technology, 124, 1245–1251 (2022) https://doi.org/10.1007/s00170-022-10603-7

James, Sagil., and Mulgaonkar, S., “ Study on Parameter Optimization of 3D Bioprinting of Hybrid Bio-Inks ” The International Journal of Advanced Manufacturing Technology, 119.11 (2022): 7063-7074. https://doi.org/10.1007/s00170-021-08561-7

James, Sagil., and Dang, C., “ Investigation of shear failure load in ultrasonic additive manufacturing of 3D CFRP/Ti structures ”, Journal of Manufacturing Processes, (2020). https://doi.org/10.1016/j.jmapro.2020.04.026

James, Sagil., and Nejadian, S. M., “ Experimental study on high-speed saw cutting of hybrid composite stacks using nanoparticle-enhanced minimum quantity lubrication”, The International Journal of Advanced Manufacturing Technology, 106.7 (2020): 1-14. https://doi.org/10.1007/s00170-020-06008-z

James, Sagil., and Patil, A., “ Study on Multiscale Modeling and Simulation of Liquid-Assisted Laser Beam Machining ”, The International Journal of Advanced Manufacturing Technology, 106.7 (2020): 3463-3474. https://doi.org/10.1007/s00170-019-04715-w

Kabariya, U., and James, Sagil., “ Study on an Energy-Harvesting Magnetorheological Damper System in Parallel Configuration for Lightweight Battery-Operated Automobiles ”, Vibration 3.3 (2020): 162-173. https://doi.org/10.3390/vibration3030013

Panchal, S. and James, Sagil., “ Finite Element Analysis and Simulation Study on Micromachining of Hybrid Composite Stacks using Micro Ultrasonic Machining Process ”, Journal of Manufacturing Processes, 48 (2019): 283-296. https://doi.org/10.1016/j.jmapro.2019.10.028

James, Sagil, and Lenny De La Luz. " Finite element analysis and simulation study of CFRP/Ti stacks using ultrasonic additive manufacturing " The International Journal of Advanced Manufacturing Technology (2019): 1-11. https://doi.org/10.1007/s00170-019-04228-6

Mahajan, A., & James, S., “ Analytical Modeling and Experimental Study of Machining of Smart Materials using Submerged Abrasive Waterjet Micromachining Process. ” International Journal of Manufacturing Research, 2019, 14(3), 1. https://doi.org/10.1504/ijmr.2019.10014338

Menon, V., and James, Sagil., " Molecular Dynamics Simulation Study of Liquid-Assisted Laser Beam Micromachining Process." Journal of Manufacturing and Materials Processing 2.3 (2018): 51. https://doi.org/10.3390/jmmp2030051

James, Sagil., and Contractor, R., “ Study on Nature-inspired Fractal Design-based Flexible Counter Electrodes for Dye-Sensitized Solar Cells Fabricated using Additive Manufacturing ”, Nature Scientific Reports, 2018, 8(1), p.17032: https://doi.org/10.1038/s41598-018-35388-2

Parmar, M., and James, Sagil., “ Experimental and Modeling Study of Liquid-Assisted—Laser Beam Micromachining of Smart Ceramic Materials ”, J. Manuf. Mater. Process. 2018, 2(2), 28; https://doi.org/10.3390/jmmp2020028 

Joshi, A., and James, Sagil. " Molecular dynamics simulation study of cold spray process. " Journal of Manufacturing Processes 33 (2018): 136-143. https://doi.org/10.1016/j.jmapro.2018.05.005

Bhavsar, S., and James, Sagil., " Thermo-mechanical finite element analysis of ultrasonic powder consolidation process." Additive Manufacturing 21 (2018): 705-712. https://doi.org/10.1016/j.addma.2018.04.021

James, Sagil. and Sonate, A., 2017. “ Experimental study on micromachining of CFRP/Ti stacks using micro ultrasonic machining process.” The International Journal of Advanced Manufacturing Technology, 2017 pp.1-9., https://doi.org/10.1007/s00170-017-1298-6

Mistry, V., and James, Sagil., " Finite element analysis and simulation of liquid-assisted laser beam machining process ." The International Journal of Advanced Manufacturing Technology 94.5-8 (2018): 2325-2331. https://doi.org/10.1007/s00170-017-1009-3

James, Sagil, and Sundaram, M.M., " A Molecular Dynamics Simulation Study of Material Removal Mechanisms in Vibration Assisted Nano Impact-Machining by Loose Abrasives." Journal of Manufacturing Science and Engineering 139.8 (2017): 081014. https://doi.org/10.1115/1.4036559

James, Sagil, and Sundaram, M.M., " Molecular dynamics simulation study of tool wear in vibration assisted nano-impact-machining by loose abrasives." Journal of Micro and Nano-Manufacturing 3.1 (2015): 011001. https://doi.org/10.1115/1.4028782

James, Sagil, and Sundaram, M.M., " A study on the vibration induced transport of nanoabrasives in liquid medium. " Powder Technology 268 (2014): 150-157., https://doi.org/10.1016/j.powtec.2014.08.032

James, Sagil. and Sundaram, M.M., Modeling of Tool Wear in Vibration Assisted Nano Impact-machining by Loose Abrasives, International Journal of Manufacturing Engineering, vol. 2014, Article ID 291564, 8 pages, 2014, https://doi.org/10.1155/2014/291564

James, Sagil. and Sundaram, M.M., Modeling of Material Removal Rate in Vibration Assisted Nano Impact-machining by Loose Abrasives, Journal of Manufacturing Science and Engineering, International Journal of Manufacturing Engineering, 2014, volume 137 issue 2 on page 021008 https://doi.org/10.1115/1.4028199

James, Sagil., Blake L. and Sundaram, M.M., Modeling and Experimental Verification of Nano Positioning System for Nanomanufacturing International Journal of Manufacturing, Materials and Mechanical Engineering (IJMMME), 2013, Volume 3, Issue 4, Pages 1-13, https://doi.org/10.4018/ijmmme.2013100101

James, Sagil. and Sundaram, M.M., A Molecular Dynamics Study of the Effect of Impact Velocity, Particle Size and Angle of Impact of Abrasive Grain in the Vibration Assisted Nano Impact- machining by Loose Abrasives”, Wear, 2013, Volume 303, Issue 1, Pages 510-518, https://doi.org/10.1016/j.wear.2013.03.039

James, Sagil. and Sundaram, M.M., A Feasibility Study of Vibration Assisted Nano Impact­ machining by Loose Abrasives using Atomic Force Microscope”, Journal of Manufacturing Science and Engineering, December 2012 - Volume 134, Issue 6, Pages 061014 (1-11), https://doi.org/10.1115/1.4007714

Conference Proceedings

James, Sagil. and Shah, K., “ Effect of Velocity and Impact Angle on Residual Stress Generation in Cold Spray Process – A Molecular Dynamics Simulation Study”, in 48th North American Manufacturing Research Conference 2020, NAMRC 2019. Society of Manufacturing Engineers, at Cincinnati, OH, USA, June 2020, Procedia Manufacturing 48 (2020): 776-780. https://doi.org/10.1016/j.promfg.2020.05.113

James, Sagil., and Shetty, A., “ Design Framework for Preparing Workforce Towards Industry 4.0 Implementation in Small and Medium-Sized Enterprises”, 2020 ASME, 15th International Manufacturing Science and Engineering Conference, MSEC 2020, American Society of Mechanical Engineers, Cincinnati, OH, USA, June 2020. https://doi.org/10.1115/MSEC2020-8380

James, Sagil., and Roy, A., “ Study of Aging Heat Treatment Parameters for 7050 and 7075 Aluminum Alloys”, 2020 ASME 15th International Manufacturing Science and Engineering Conference, MSEC 2020, American Society of Mechanical Engineers, Cincinnati, OH, USA, June 2020. https://doi.org/10.1115/MSEC2020-8348

James, Sagil., and Nejadian, S. M., “ Preliminary Study on High-Speed Machining of Hybrid Composite Stacks Using Nanoparticle Enhanced MQL”, 2020 ASME, 15th International Manufacturing Science and Engineering Conference, MSEC 2020, American Society of Mechanical Engineers, Cincinnati, OH, USA, June 2020. https://doi.org/10.1115/MSEC2020-8523

James, Sagil., and Roy, A., “ Optimization of Heat Treatment Aging Process Parameters for 7050 and 7075 Aluminum Alloys ”, 2019 American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE), November 11-14, 2019 at Salt Lake City, Utah, ASME Vol. 59490 2019. https://doi.org/10.1115/IMECE2019-12045

James, Sagil., and Shetty, A., “ An Initial Framework for Implementation of Industry 4.0 in the High Technological Manufacturing Sector in Southern California ”, 2019 American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE), November 11-14, 2019 at Salt Lake City, Utah, ASME Vol. 59384., 2019. https://doi.org/10.1115/IMECE2019-12050

James, Sagil., and Cervantes, A., “ Study of Industry 4.0 and Its Impact on Lean Transformation in Aerospace Manufacturing ”, 2019 American Society of Mechanical Engineers (ASME) International Design Engineering Technical Conferences (IDETC) & Computers and Information in Engineering Conference, August 18-21, 2019 at Anaheim, CA. https://doi.org/10.1115/DETC2019-98147

James, Sagil. and Shah, K., “ Investigation on Residual Stress Development During Multiple Impacts in Cold Spray Process ” 2019 ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2716

James, Sagil., and Navarro, C., “ Molecular Dynamics Simulation of Nanoparticle Infiltration during Binder Jetting Additive Manufacturing Process – A Preliminary Study ” 2019 ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2872

James, Sagil., and Parikh, K., “ Study on Selective Electroless Plating of 3d Printed Counter Electrodes For Dye-sensitized Solar Cells ” 2019 ASME 14th International Manufacturing Science and Engineering Conference MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2887

James, Sagil., and Shivakumar, T., “Preliminary Study on Effects of the Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process ” 2019 ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2917

James, Sagil. and Patil, A., “ Preliminary Study on Multiscale Modeling and Simulation of Liquid-Assisted Laser Beam Machining ” 2019 ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2758

James, Sagil., Birar, S., Parekh, R., Jain, K., and George, K., “ Preliminary Study on Fractal-Based Monopole Antenna Fabricated Using 3D Polymer Printing and Selective Electrodeposition Process ” 2019 ASME 14th International Manufacturing Science and Engineering Conference, MSEC 2019, American Society of Mechanical Engineers, Erie, PA, USA, June 2019. https://doi.org/10.1115/MSEC2019-2901

James, Sagil., and Narkhede, M.,“ Analytical modeling and experimental study on machining of CFRP/Ti stacks with submerged abrasive waterjet machining ”, in 47th North American Manufacturing Research Conference 2019, NAMRC 2019. Society of Manufacturing Engineers, at Erie, Pennsylvania, June 2019, Procedia Manufacturing 34 (2019): 328-334. https://doi.org/10.1016/j.promfg.2019.06.170

James, Sagil., and Panchal, S., “ Parametric Study of Micro Ultrasonic Machining Process of Hybrid Composite Stacks using Finite Element Analysis ”, in 47th North American Manufacturing Research Conference 2019, NAMRC 2019. Society of Manufacturing Engineers, at Erie, Pennsylvania, June 2019, Procedia Manufacturing 34 (2019): 408-417. https://doi.org/10.1016/j.promfg.2019.06.185

Narkhede M., and James, Sagil.,  “ Experimental Study on Machining of Hybrid Composite Stacks using Submerged Abrasive Waterjet Machining Process ”, 2018 American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE), November 11-14, 2018 at Pittsburgh, PA, IMECE2018-88179, V002T02A017, https://doi.org/10.1115/IMECE2018-88179

Joshi, A., and James, Sagil., “ Molecular Dynamics Simulation Study on Effect of Process Parameters on Coatings during Cold Spray Process ”, in 46th North American Manufacturing Research Conference 2018, NAMRC 2018. Society of Manufacturing Engineers, at Texas A&M, Texas, 2018, Procedia Manufacturing 26 (2018): 190–197. https://doi.org/10.1016/j.promfg.2018.07.026

James, Sagil. and Sundaram, M.M., “ Effects of water molecules on material removal behavior in Vibration Assisted Nano Impact-machining by Loose Abrasives - A molecular dynamics simulation study ”, in 46th  North American Manufacturing Research Conference 2018, NAMRC 2018. Society of Manufacturing Engineers, at Texas A&M, Texas, 2018, Procedia Manufacturing 26 (2018): 552–559. https://doi.org/10.1016/j.promfg.2018.07.065

James, Sagil. and Bhavsar, S., “ Finite Element Analysis and Simulation of Ultrasonic Powder Consolidation Process ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes.  https://doi.org/10.1115/msec2018-6356

James, Sagil. and Rajanna, P., “ Molecular Dynamics Simulation Study of Ultrasonic Powder Consolidation Process ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes,  https://doi.org/10.1115/msec2018-6469

James, Sagil., Menon, V.A., and Parmar, M., “ Molecular Dynamics Simulation Study of Liquid-Assisted Laser Beam Machining Process ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes. https://doi.org/10.1115/msec2018-6504

James, Sagil. and Kakadiya, S., “ Experimental Study of Machining of Shape Memory Alloys Using Dry Micro Electrical Discharge Machining Process ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes.  https://doi.org/10.1115/msec2018-6573

James, Sagil., Sonate, A., Dang, C., and De La Luz, L., “ Experimental and Simulation Study Of Ultrasonic Additive Manufacturing of CFRP/Ti Stacks ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes.  https://doi.org/10.1115/msec2018-6647

James, Sagil. and Mahajan, A., “ Experimental Study of Machining of Smart Materials Using Submerged Abrasive Waterjet Micromachining Process ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 4: Processes. https://doi.org/10.1115/msec2018-6494

James, Sagil., Contractor, R., Veyna, C., and Jiang, G., “ Fabrication Of Efficient Electrodes For Dye Sensitized Solar Cells Using Additive Manufacturing ”, in ASME 2018 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers at Texas A&M, Texas, 2018, Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing. https://doi.org/10.1115/msec2018-6709

Kakadiya, S., and James, Sagil., “Experimental Study on Micromachining of Ceramic Metal Matrix Composites Using Dry Electrical Discharge Machining Process”, in SAMPE 2018 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, Long Beach, California, May, 2018.

Panchal, S., Sonate, A., and James, Sagil., “Finite Element Analysis and Simulation of Micro Ultrasonic Machining of CFRP/Ti Stacks”, in SAMPE 2018 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, Long Beach, California, May, 2018.

Menon, V., Parmar, M., and James, Sagil., “Molecular Dynamics Simulation of Droplet-Assisted Laser Micromachining of Ceramic Materials”, in SAMPE 2018 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, Long Beach, California, May, 2018.

Narkhede, M., Mahajan, A., and James, Sagil., “Experimental Study on Submerged Abrasive Waterjet Machining Process of Fiber Reinforced Polymer Composites”, in SAMPE 2018 Conference and Exhibition. Soc. for the Advancement of Material and Process Engineering, Long Beach, California, May, 2018.

Sonate, A., Vepuri D., and James, Sagil., “ Study of Micro Ultrasonic Machining of CFRP/Ti Stacks ”, 2017 American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition (IMECE), November 2-9, 2017 at Tampa, Florida, Volume 2: Advanced Manufacturing.   https://doi.org/10.1115/imece2017-72317

Sundaram, M.M. and James, Sagil. “Vibration Assisted Nano Abrasive Machining”, 7th International Conference on Precision, Meso, Micro, and Nano Engineering (COPEN), December 10-11, 2011, College of Engineering Pune, pp.20-25

Mathew, R., James, Sagil., & Sundaram, M. M. (2010). “ Experimental Study of Micro Tools Fabricated by Electrochemical Machining.” ASME 2010 International Manufacturing Science and Engineering Conference, Volume 1., https://doi.org/10.1115/msec2010-34105

Research Presentations, Posters, and Invited Talks

Cruz, G.B., Hunnel, E., Nguyen, C., Bachor, M., and James, Sagil., “Smart Drone Technology for Disaster Rescue in Complex Environments”, Presentation, 2023 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted by California State University, Fullerton, on November 18, 2023

Layosa, J., Cruz, A., Rivera, E., Carranza, A., Espinoza, M., Gonzalez, V.Z., and James, Sagil., “Study on CubeSat Technology for Early Detection and Prevention of Chaparral Ecosystems”, Poster, 2023 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted by California State University, Fullerton, on November 18, 2023

Lindwall, M., Dominguez, C., Garcia, A., Minero, A., Garcia, B., Alonso, J.R., Pratanavanich, T., Tran, D. and James, Sagil., “Titan Green - Hydrogen-Powered Boats: Pioneering Eco-Adventures of Tomorrow”, Presentation, 2023 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted by California State University, Fullerton, on November 18, 2023

Pena, C., Rutherford, D., Khella, A., Doan, D., Dunham, R., Ian, C., and James, Sagil., “Energy Harvesting from Suspension Systems to Enhance the Battery Performance of Electric Utility Vehicles”, Presentation, 2023 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted by California State University, Fullerton, on November 18, 2023

Nguyen, B., and James, Sagil., “Exploring Industry 4.0 through PLC Smart Factory Integration”, Poster, 2023 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted by California State University, Fullerton, on November 18, 2023

James, Sagil., “Implementation Challenges of Industry 4.0 in Research and Workforce Development”, Presentation, 2023 Industry 4.0 Technology Implementation (Digital Twin/Cyber Physical Systems/Cyber Manufacturing) Texas A&M University, Virtual Workshop, July 20, 2023

Rangel, M., Sanchez, G., and James, Sagil., “Study on Smart Reconfigurable Drone Technology for Search and Rescue in Natural Disasters” Presentation, 2023 California State University Fullerton Student Research Competition, held at California State University, Fullerton in February, 2023 (Selected as 2023 CSUF Student Research Competition Finalist)

Mazaheri, M., and James, Sagil., “Study on high-speed machining of 2219 Aluminum utilizing Nanoparticle-Enhanced MQL lubrication” Presentation, California State University 36th California State-level Student Research Competition, April 2022, California State University Fullerton, CA (Second Prize)

Mazaheri, M., and James, Sagil., “Study on high-speed machining of 2219 Aluminum utilizing Nanoparticle-Enhanced MQL lubrication”, Presentation, 2022 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 25, 2022 (Selected as 2022 CSUF Student Research Competition Finalist)

Lal, S., Bathala, R., Guzman, J., and James, Sagil., “Wildfire Detection CubeSat”, Presentation, 2022 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 4-8, 2022

Lewis, E., Lum, A., Farinas, B., and James, Sagil., “Investigation of Scalable Green Hydrogen Production Methods: Moving Towards a Sustainable Hydrogen Economy in California”, Presentation, 2022 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 4-8, 2022

Hernandez, M., McGrath, S., Robles, C., Whitman, R., and James, Sagil., “Study on Hyper-Efficient Electric Vehicles as a means of Sustainable Transportation”, Presentation, 2021 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted Virtually by California State University, San Bernardino, on November 20, 2021

Alromaithi, O., Alromaithi, H., and James, Sagil., “Study of wildfire mitigation using smart drone technology and hexagonal cellular automata model”, Presentation, 2021 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted Virtually by California State University, San Bernardino, on November 20, 2021

Balcita, E., Lewis, E., Lum, A., Farinas, B., Rodriguez, I., Diaz, J., and James, Sagil., “Investigation of Scalable Green Hydrogen Production Methods: Moving Towards a Sustainable Hydrogen Economy in California”, Presentation, 2021 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted Virtually by California State University, San Bernardino, on November 20, 2021

Lal, S., Ayala, E., Bathala, R., Guzman, J., and James, Sagil., “Study on Wildfire Detection and Monitoring using Multi-sensor CubeSat Technology”, Presentation, 2021 Annual Southern California Conferences for Undergraduate Research (SCCUR), Hosted Virtually by California State University, San Bernardino, on November 20, 2021

Castellanos, E., Flores, R., AlRasheed, A., Navarro, E., Rosales, B., Gama, J., and James, Sagil., “Photogrammetry Volumetric 3D Printing”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Williams, K., Babb, P., Arai, Cary, S., George, S., Calderon, V., Rodriguez, A., and James, Sagil., “Titan Wildfire Infrared Prevention Satellite CubeSat”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Schatz, J., Medina, A.G., Sanchez, E., Ly, Q., Rodriguez, S.V., Nguyen, T., Huynh, P., and James, Sagil., “Human-Electric Hybrid Vehicle”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Garcia, D., Chavez, A., Tuazon, B., Douglas, C., Fawaz, H., Viers, T., and James, Sagil., “Titan Energy Generation System”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Galvan, R., Alhasan, F., Ramirez, M., Baza, Priego, K., and James, Sagil., “Titan Fire Intervention & Relief Efforts”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Abdulredha, H., and James, Sagil., “Compact Crane for Fishing Cages and Nets”, Presentation, 2021 National Conferences on Undergraduate Research (NCUR) Virtual Conference, April 12-14, 2021

Babb, P., Arai, Kye., and James, Sagil., “Titan Wildfire Infrared Prevention Satellite (TWIRPS)”, Poster, 2021 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 26, 2021

Garcia, D., Chavez, A., Tuazon, B., Douglas, C., Fawaz, H., Viers, T., and James, Sagil., “Titan Energy Generation System”, Poster, 2021 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 26, 2021

Babb, P., Arai, K., and James, Sagil., “Titan Wildfire Infrared Prevention Satellite CubeSat”, Virtual Presentation, California State University 35th California State level Student Research Competition at Cal Poly Pomona, April 30 - May 1, 2021

Babb, P., Arai, K., and James, Sagil., “Titan Wildfire Infrared Prevention Satellite CubeSat”, Virtual Presentation, 2021 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21, 2021 (Selected as 2021 CSUF Student Research Competition Finalist)

Mulgaonkar, S., and James, Sagil., “Study on Reducing Greenhouse Gas Emissions from Automobiles using Generative Design Process and Additive Manufacturing”, Presentation, 2020 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Speed R & D Competition, May 2020, Virtual Event (Graduate Level 2nd Runner-Up Award)

Aleissa, A., Almodhyan, A., and James, Sagil., “Wildfire-averting forecast and early response system: Numerically estimating fire behavior for streamlined wildfire suppression”, Virtual Presentation, California State University 34th California State level Student Research Competition, April 2020

Mulgaonkar, S., and James, Sagil., “Reducing automobile greenhouse gas emissions using generative design process and additive manufacturing”, Virtual Presentation, California State University 34th California State level Student Research Competition, April 2020

Aleissa, A., Almodhyan, A., and James, Sagil., “Wildfire-averting forecast and early response system: Numerically estimating fire behavior for streamlined wildfire suppression”, Presentation, 2020 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 25, 2020 (Selected as 2020 CSUF Student Research Competition Finalist)

Mulgaonkar, S., and James, Sagil., “Reducing automobile greenhouse gas emissions using generative design process and additive manufacturing”, Presentation, 2020 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 25, 2020 (Selected as 2020 CSUF Student Research Competition Finalist)

James, Sagil., Alshammary F, Sewani N, Almuhaelej S., “Smart High-Efficiency Wind Turbine for Freeways”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., Banks D, Tran J, Daniel S., “Liquid Desiccant Based, High Efficiency, Inexpensive Heating Air Conditioning and Ventilation System”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

Morales V, Mulgaonkar S, James Sagil., “Study on Sustainability of 3D Printing Technologies”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

Barksdale S, Vazquez B, James Sagil, Mulgaonkar S., “Using Reverse Engineering and Functional Analysis to Improve Ergonomics of Handheld Sports Equipment”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., James S, George K, Sam B, Patel N., “Design, Fabrication and Testing of Miniature Satellite-TechEDSat”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., Lortz N, Barnett J, Gociu A., “Smart Skimmer to Efficiently Clean Oil Spills and Improve Environment Health” Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., Albisher A, Aleissa A, Alrashed A., “Smart Drone Technology for Wildfire Prediction and Prevention”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

Quinonez F, Mulgaonkar S, James Sagil., “Study on Increasing Energy Harvesting in Hybrid Smart Suspension System for Personal Automobiles.”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., Elias-Hicks M, Novan R, Phung N., “Zero-Emission Smart Bathing Apparatus to Improve General Health and Hygiene”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

James, Sagil., Koeberlein J, Schnupp C, Mulgaonkar S., “Study on the Application of Generative Design Process and 3D Printing on Personal Transportation Devices”, Poster, 27th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2019, held at California State University San Marcos, San Marcos, CA on November 23, 2019

Shivakumar, T., and James, Sagil., “Study on Effects of The Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process”, Presentation, 2019 American Society of Mechanical Engineers ASME Orange County Professional Section FutureME Social Meetup & Student Presentation Night, May 3rd, 2019, California State University Fullerton, Fullerton, CA (Second Prize)

Birar, S., and James, Sagil., “Design and Fabrication of High-Performance Fractal Based Monopole Antennas using 3D Polymer Printing and Selective Electrodeposition Process”, Presentation, 2019 American Society of Mechanical Engineers ASME Orange County Professional Section FutureME Social Meetup & Student Presentation Night, May 3rd, 2019, California State University Fullerton, Fullerton, CA

Normand, G., Pike, A., Aguilar, A., James, Sagil., “Portable Solar Atmospheric Water Generator” Presentation, 2019 American Society of Mechanical Engineers ASME Orange County Professional Section FutureME Social Meetup & Student Presentation Night, May 3rd, 2019, California State University Fullerton, Fullerton, CA

Shivakumar, T., and James, Sagil., “Study on Liquid Volumetric Additive Manufacturing Process for Aerospace Applications”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA (Graduate Student Runner-Up Award)

Birar, S., Almutairi, F., Abdeen, Y., Alsanousiand, A., James, Sagil., “Design and Development of High-Performance Low-Cost Monopole Antennas Using 3d Polymer Printing and Electrodeposition Process”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Haire, J., Albano, J., Battung, P., and James, Sagil., “Design and Fabrication of a Novel Ocean Wave Energy Converter”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Shetty, A., and James, Sagil., “Implementation of Industry 4.0 in the Aerospace and Defense manufacturing sector in Southern California”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Shah, K., and James, Sagil., “Study on Residual Stress Development in Cold Spray Process for Applications in Aerospace and Defense Industries”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Patil, A., and James, Sagil., “Study on Multiscale Modeling and Simulation of Liquid-Assisted Laser Beam Machining Process”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Perkins, T., Alkandari, A., Lam, D., and James, Sagil., “Smart Wind Chime-based Home Security System”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Alzanki, A., Alenezi, F., Alomani, K., and James, Sagil., “Smart Solar Recycling Bin based on Barcode Technology”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Normand, G., Pike, A., Aguilar, A., James, Sagil., “Portable Solar Atmospheric Water Generator”, Poster, 2019 Society of Manufacturing Engineers (SME) AeroDef Manufacturing Conference, April – May 2019, Long Beach, CA

Shivakumar, T., and James, Sagil., “Study on Effects of The Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process”, Presentation, California State University 33rd California State level Student Research Competition, April 2019, California State University Fullerton, CA (First Prize in Engineering and Computer Sciences – Graduate Category)

Birar, S., and James, S., “Design and Fabrication of High-Performance Fractal Antennas” Presentation, California State University 33rd California State level Student Research Competition, April 2019, California State University Fullerton, CA

Shivakumar, T., and James, Sagil., “Study on Effects of The Process Parameters on Mechanical Properties in Liquid Holographic Volumetric Additive Manufacturing Process”, Presentation, 2019 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 27, 2019 (Selected as 2019 CSUF Student Research Competition Finalist)

Birar, S., and James, Sagil., “Design and Fabrication of High-Performance Fractal Antennas,” Presentation, 2019 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 27, 2019 (Selected as 2019 CSUF Student Research Competition Finalist)

James, Sagil., Jubile, J., Amador, S., Bagherinia, S., “Design and Fabrication of a Miniature Satellite for Measuring Temperature and Sunlight Light Intensity” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Normand, G., Pike, A., Aguilar, A., “A Novel Low-Cost Portable Solar-Powered Atmospheric Water Generator” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Haire, J., Albano, J., Battung, P., “Design of a Novel Ocean Wave Energy Generator” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Alzanki, A., Alenezi, F., Alomani, K., “Smart Solar Recycling Bin based on Barcode Technology” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Nabilsi, S., Jimenez, I.V., Espinoza, A., “Design and Analysis of Rear-Wheel Steering Technology for Parade Floats Applications” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Almalaq, M., Hicks, M.E., Portillo, A., “Design, Fabrication, and Analysis of Low-Cost Smart Solar Powered Energy Harvesting Micro Air Vehicles using 3D Printing” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Perkins, T., Alkandari, A., Lam, D., “Smart Wind Chime-based Home Security System” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasadena, CA on November 17, 2018

James, Sagil., Guerrero, Y., Nguyen, J., Mclellan, T., “Design of a Cyclic Pressure System for Accelerated Wear Testing” Poster, 26th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2018, held at Pasadena City College, Pasedena, CA on November 17, 2018

Parikh, K., and James, Sagil., “Selective Electroless Plating of 3D Printed Parts for Thin-Film Solar Cell Applications”, Presentation, 2018 American Society of Mechanical Engineers (ASME) Orange County’s Student Presentation Night, held at California State University, Fullerton on May 8, 2018 (First Prize)

Dang, C., De La Luz, L., and James, Sagil., “Experimental and Simulation Study of Ultrasonic Additive Manufacturing of CFRP/TI Stacks”, Presentation, 2018 American Society of Mechanical Engineers (ASME) Orange County’s Student Presentation Night, held at California State University, Fullerton on May 8, 2018 (Second Prize)

Kakadiya, S., and James, Sagil., “Experimental Study on Dry Micro Electrical Discharge Machining of Shape Memory Alloys”, Presentation, 2018 American Society of Mechanical Engineers (ASME) Orange County’s Student Presentation Night, held at California State University, Fullerton on May 8, 2018 (Third Prize)

Menon, V., and James, Sagil., “Molecular Dynamics Simulation Study of Liquid-Assisted Laser Beam Machining Process”, Presentation, California State University 32nd Annual Student Research Competition, held at California State University, Sacramento on May 4-5, 2018 (Second Prize in Engineering and Computer Sciences – Graduate Category)

Dang, C., and James, Sagil., “Study on Ultrasonic Additive Manufacturing Process for Fabricating Advanced Composite Structures for Aerospace Applications”, Poster, 2018 AeroDef Manufacturing Conference in Long Beach, CA held on March 27, 2018 (Graduate Student Runner-Up Award)

Kakadiya, S., and James, Sagil., “Dry Micro Electrical Discharge Machining of Active Materials for Aerospace Applications”, Poster, 2018 AeroDef Manufacturing Conference in Long Beach, CA held on March 27, 2018

Menon, V., and James, Sagil., “Study of Precision Machining of Aerospace Composite Stacks using Micro Ultrasonic Machining Process”, Poster, 2018 AeroDef Manufacturing Conference in Long Beach, CA held on March 27, 2018

Panchal, S., and James, Sagil., “Study of Precision Machining of Aerospace Composite Stacks using Micro Ultrasonic Machining Process”, Poster, 2018 AeroDef Manufacturing Conference in Long Beach, CA held on March 27, 2018

Dang, C., De La Luz, L., and James, Sagil., “Experimental and Simulation Study of Ultrasonic Additive Manufacturing of CFRP/TI Stacks”, Presentation, 2018 California State University Fullerton Student Research Competition, held at California State University, Fullerton on March 1, 2018

Menon, V., and James, Sagil., “Molecular Dynamics Simulation Study of Liquid-Assisted Laser Beam Machining Process”, Presentation, 2018 California State University Fullerton Student Research Competition, held at California State University, Fullerton on March 1, 2018

Panchal, S., and James, Sagil., “Finite Element Analysis and Simulation of Micro Ultrasonic Machining of CFRP/Ti Stacks”, Presentation, 2018 California State University Fullerton Student Research Competition, held at California State University, Fullerton on March 1, 2018

Kakadiya, S., and James, Sagil., “Experimental Study on Dry Micro Electrical Discharge Machining Of Shape Memory Alloys”, Presentation, 2018 California State University Fullerton Student Research Competition, held at California State University, Fullerton on March 1, 2018

Perkins, T., Garibay, A., and James, Sagil., “Design Fabrication and Analysis of Low-Cost Customized Dog Wheelchair using Additive Manufacturing”, Presentation, 2018 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 27, 2018

James, Sagil., “Intelligent Manufacturing in Academics”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on January 23, 2018

James, Sagil., “Overview of Intelligent Manufacturing”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on January 22, 2018

James, Sagil., “Analysis of Automation Ideas and Technology”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on January 11, 2018

James, Sagil., “Advanced Manufacturing Technology and Philosophy”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on January 9, 2018

Veyna, C., Jiang, G., Contractor, R., and James, Sagil., “Design and Fabrication of Low-Cost Flexible Solar Cells using 3D Printing Technology” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

Dunlavy, S., Blanke, C., Chen, Y., Eng, C., Ndungu, J., Ozog, C., and James, Sagil., “Design and Fabrication of a Micro Abrasive Waterjet Cutting System” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

Cole, J., Alzofiri, S., Gallardo, V., Pasillas, M., and James, Sagil., “Design and Fabrication of a Micro Electro Discharge Machining System” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

Mehrparvar, S., Ahmed, R., Bulan, E.C., Lam, R., Lona, L., Politico, J., Portillo, J., Zahler, C., and James, Sagil., “Design and Fabrication of Smart Suspension for Battery Operated Vehicles” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

Anderson, L., Almohaimeed, M.A.S., Martin, J., and James, Sagil., “Design and Fabrication of a Low-Cost CO2 Laser Beam Micromachining System” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

Santiago, R.J., Abbas, A., Alkhabbaz, M., Higuera, J., Tran, A., and James, Sagil., “Study on Fabrication of Smart 3D Printing Technology” Poster, 25th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2017, held at Cal Poly Pomona, Riverside on November 18, 2017

James, Sagil., “Emerging Trends in Advanced Manufacturing”, Presentation, held at The Center for Academic Support in Engineering and Computer Science (CASECS) ECS Faculty & Student Research Speaker Series, College of Engineering and Computer Science, California State University Fullerton on October 25, 2017

Cervantes, A., and James, Sagil., “Study of Industry 4.0 and Its Impact on Lean Transformation in Aerospace Manufacturing”, Poster, Great Minds in STEM (GMiS) Research Poster Competition at 29th Hispanic Engineer National Achievement Awards Corporation (HENAAC) Conference, Pasadena, CA, October 18-22, 2017

Cervantes, A., and James, Sagil., “Industry 4.0: The Fourth Industrial Revolution”, Presentation, 2017 Society of Manufacturing Engineers (SME) Technology Talk, held at California State University, Fullerton on September 27, 2017

Contractor, R., Jiang, G., Veyna, C., and James, Sagil., “Cost-Effective Thin Film Solar Cells Using Additive Manufacturing”, Presentation, 2017 Society of Manufacturing Engineers (SME) Technology Talk, held at California State University, Fullerton on August 29, 2017

James, Sagil., “Automation Techniques in Industrial Manufacturing in U.S.”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on September 5, 2017

James, Sagil., “Overview of Cutting edge Manufacturing Techniques in U.S.”, Invited Talk, held at Global Education Institute (GEI), College of the Extended University, Cal Poly Pomona on September 5, 2017

Parmar, M., and James, Sagil., “Laser Beam Micromachining and its Applications”, Presentation, Society of Manufacturing Engineers (SME) Chapter 233 Annual Mixer Event held at Romac Industries, Commerce, CA on July 20, 2017

Joshi, A., and James, Sagil., “Applications of Cold Spray Process”, Presentation, Society of Manufacturing Engineers (SME) Chapter 233 Annual Mixer Event held at Romac Industries, Commerce, CA on July 20, 2017

Sonate, A., and James, Sagil., “Micro-Ultrasonic Machining and its Applications”, Presentation, Society of Manufacturing Engineers (SME) Chapter 233 Annual Mixer Event held at Romac Industries, Commerce, CA on July 20, 2017

James, Sagil. and Parmar, M., “Study of Liquid Assisted - Laser Beam Micromachining of Smart Materials”, Poster, in 12th Manufacturing Science and Engineering Conference (MSEC) 2017 - American Society of Mechanical Engineers (ASME) at University of Southern California, Los Angeles, California, June 4-8, 2017

James, Sagil. and Joshi, A., “Molecular Dynamics Simulation Study of Cold Spray Process”, Poster, in 12th Manufacturing Science and Engineering Conference (MSEC) 2017 - American Society of Mechanical Engineers (ASME) at University of Southern California, Los Angeles, California, June 4-8, 2017

Contractor, R., Jiang, G., Phelan, P., Aguilar, A., Veyna, C., and James, Sagil., “Design and Fabrication of Cost-Effective Flexible Thin-Film Solar Cells using Additive Manufacturing”, Presentation, in 12th Manufacturing Science and Engineering Conference (MSEC) - Student Manufacturing Design Competition - American Society of Mechanical Engineers (ASME) at University of Southern California, Los Angeles, California, June 4-8, 2017

Alsharhan, A., Ward, T., Veyna, C., Kean, R., Le, H., and James, Sagil., “Building a low-cost Atomic Force Microscope” Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Patel, S., Jiandani, A. J., Sonate, A., and James, Sagil., “Study on Micro Electro-chemical Machining of Smart Materials”, Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Parmar, M., and James, Sagil., “Experimental Study of Liquid Assisted - Laser Beam Micromachining of Smart Materials”, Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Joshi, A., and James, Sagil., “Molecular Dynamic Simulation of Cold Spray Process”, Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Sonate, A., and James, Sagil., “Experimental Study on Micro-Ultrasonic Machining of Composites”, Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Contractor, R., Jiang, G., Phelan, P., Aguilar, A., Veyna, C., and James, Sagil., “Design and Fabrication of Cost-Effective Flexible Thin-Film Solar Cells using Additive Manufacturing”, Poster, in College of Engineering and Computer Science (ECS) Showcase Event 2017 at California State University Fullerton, May 8, 2017

Parmar, M., and James, Sagil., “Experimental Study of Liquid Assisted - Laser Beam Micromachining of Smart Materials”, Presentation, California State University 31st Annual Student Research Competition, held at Cal Poly San Luis Obispo on April 28-29, 2017 (Frist Prize in Engineering and Computer Sciences – Graduate Category)

Alsharhan, A., Ward, T., Veyna, C., Kean, R., Le, H., and James, Sagil., “Building a low-cost Atomic Force Microscope” Presentation, California State University 31st Annual Student Research Competition, held at Cal Poly San Luis Obispo on April 28-29, 2017

Parmar, M., and James, Sagil., “Experimental Study of Liquid Assisted - Laser Beam Micromachining of Smart Materials”, Presentation, 2017 American Society of Mechanical Engineers (ASME) Orange County’s Student Presentation Night, held at California State University, Fullerton on April 25, 2017 (Third Prize)

Contractor, R., Jiang, G., Phelan, P., Aguilar, A., Veyna, C., and James, Sagil., “Design and Fabrication of Cost-Effective Flexible Thin-Film Solar Cells using Additive Manufacturing”, Presentation, 2017 American Society of Mechanical Engineers (ASME) Orange County’s Student Presentation Night, held at California State University, Fullerton on April 25, 2017 (Second Prize)

Palande, V., Zaheer, A., Alsharhan, A., James, Sagil., and George, K., “Titan Smartponics” Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Kakadiya, S., Alkandari, A., Alsharhan, A., Alkandry, Y., Alsediqi, A., and James, Sagil., “Experimental Study on Dry Micro Electrical Discharge Machining Process” Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Contractor, R., Jiang, G., Phelan, P., Aguilar, A., Veyna, C., and James, Sagil., “Design and Fabrication of Cost-Effective Flexible Thin-Film Solar Cells using Additive Manufacturing”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Rajanna, P., and James, Sagil., “Molecular Dynamics Simulation Study on Ultrasonic Powder Consolidation”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Mahajan, A., and James, Sagil., “Study on Submerged Abrasive Waterjet Micromachining of Smart Materials”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Patel, S., Jiandani, A. J., Sonate, A., and James, Sagil., “Study on Micro Electro-chemical Machining of Smart Materials”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Kabariya, U. R., and James, Sagil., “Study on Smart Suspension System for Battery-Operated Automobiles”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Mistry, V., and James, Sagil., “Simulation of Laser Beam Micromachining Process”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Bhavsar, S., and James, Sagil., “Feasible study of Ultrasonic Additive Manufacturing Process”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Joshi, A., and James, Sagil., “Molecular Dynamic Simulation of Cold Spray Process”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Parmar, M., and James, Sagil., “Experimental Study of Liquid Assisted - Laser Beam Micromachining of Smart Materials”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Alsharhan, A., Ward, T., Veyna, C., Kean, R., Le, H., and James, Sagil., “Building a low-cost Atomic Force Microscope” Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Sonate, A., and James, Sagil., “Experimental Study on Micro-Ultrasonic Machining of Composites”, Poster, 2017 California State University Fullerton Student Creative Activities and Research Day, held at California State University, Fullerton on April 12, 2017

Palande V., Zaheer, A., Alsharhan, A., James, Sagil., and George, K., “Titan Smartponics” Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017

Mistry, V., and James, Sagil., “Process Simulation of Laser Beam Micromachining”, Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017

Bhavsar, S., and James, Sagil., “Feasibility study of Ultrasonic Additive Manufacturing Process”, Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017

Joshi, A., and James, Sagil., “A Molecular Dynamics Simulation Study on Cold Spray Process”, Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017

Parmar, M., and James, Sagil., “Experimental Study on Liquid-assisted Laser Beam Micro-Machining of Smart Materials”, Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017 (Selected as 2017 CSUF Student Research Competition Finalists)

Alsharhan, A., Ward, T., Veyna, C., Kean, R., Le, H., and James, Sagil., “Building a low-cost Atomic Force Microscope” Presentation, 2017 California State University Fullerton Student Research Competition, held at California State University, Fullerton on February 21-23, 2017 (Selected as 2017 CSUF Student Research Competition Finalists)

James, Sagil., “Micromachining of Advanced Ceramics and Composite Materials”, Invited Talk, Computer Numeric Control Training Program, held at Extended University at California State Polytechnic University, Pomona on November 29, 2016

Boyd, J., Guzman, E., Mahajan, A., and James, Sagil., “Experimental Study on Submerged Abrasive Waterjet Micromachining” Poster, 24th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2016, held at University of California, Riverside on Nov. 12, 2016

Alkandari, A., Alsharhan, A., Alkandry, Y., Alsediqi, A., and James, Sagil., “Experimental Study on Dry Micro Electrical Discharge Machining Process” Poster, 24th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2016, held at University of California, Riverside on Nov. 12, 2016

Perez, J., Robles, L., Archbold, S., and James, Sagil., “Micromachining of Smart Materials using Laser Beam Micromachining Process” Presentation, 24th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2016, held at University of California, Riverside on Nov. 12, 2016

Alsharhan, A., Ward, T., Veyna, C., Kean, R., Le, H., and James, Sagil., “Building a low-cost Atomic Force Microscope” Poster, 24th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2016, held at University of California, Riverside on Nov. 12, 2016

Sanchez, G., Moyao, M., Dang, J., Garcia, Y., DeJesus, B., Limsakoune, C., James, Sagil., Rasche, M., and Robson, Nina., “Biomedical 3D Metal Printed Die” Poster, 24th Annual Southern California Conferences for Undergraduate Research (SCCUR) 2016, held at University of California, Riverside on November 12, 2016

Amoroso, J., Pedro, J., Costa, V., Sonate, A., and James, Sagil., “Machining of Composites using Micro Ultrasonic Machining Process” Poster, Student International Research Institute (SIRI) 2016, held at California State University Fullerton on July 28, 2016

Castro, F., Carlos, J., Araujo, M., Rossi, M., Teixeira, M., and James, Sagil., “Micro Abrasive Water Jet Machining of Ceramics” Poster, Student International Research Institute (SIRI) 2016, held at California State University Fullerton on July 28, 2016

Sundaram, M. M., James, Sagil. and Rajurkar, K.P , “Exploratory Study of Nano Ultrasonic Machining Process” Poster, Workshop on Nano and Micro Manufacturing held at Dearborn, Michigan on May 23, 2013

James, Sagil. and Sundaram, M. M., “Study of Vibration Assisted Nano Impact-Machining by Loose Abrasives (VANILA) Process” 2013 Graduate Poster Forum held at University of Cincinnati on March 1, 2013 (Best poster award)

Blake, L., James, Sagil., and Sundaram, M. M., “Design of a Nano-Positioning System for Nano-manufacturing” 8th Annual Dayton Engineering Sciences Symposium (DESS) on October 29, 2012 at Wright State University Student Union, Dayton, OH